Kegerators & Beer Dispensers

Kegerators & Beer Dispensers is a residential or commercial grade draft (draught) beer dispensing device. Kegs, typically of beer, are stored in a refrigerated container in order to keep the keg chilled. The user is able to maintain a tapped keg in such a device for extended periods of time, usually a couple of months, without losing any quality in the taste of the beer.

Parts of a Kegerator:

  • CO2 tank
  • Regulator
  • Coupler
  • Beer & Air Line
  • Tap
  • Tower
  • Drip Tray
  • Faucet
  • Faucet Handle

We specialized in customizing all different kinds of keg dispensers including single faucet, dual Faucets, Triple faucets Kegerator Beer Dispensers and commercial grade Keg dispensers, suitable for home, undercounted built-in, outdoor or commercial use.

Home Brew Kegerators

Stainless Steel Door

Black Door


  • Digital temperature display with push button controls makes it easy to set and verify internal temperature
  • Fan forced cooling provides even cooling and one of the coldest temperature ranges of any kegerator on the market today
  • Interior is spacious enough to hold one 1/2 barrel or 1/4 barrel, two 1/6-barrels, or three home brew kegs
  • Deep chill function allows you to quickly cool down a warm keg by forcing the compressor to work continuously for 24 hours
  • Comes with 2 adjustable shelves that allow you to convert it into an all refrigerator for extra storage

ZPJ-170 Keg Beer Refrigerator with Single Faucet Dispense System

Includes a brand aluminum 5 lb. Aluminum Co2 Tank
DOT certificated Co2 tank included
Includes Single Gauge Co2 Regulator
This Regulator works with any Co2 Tank with a valve. The single gauge measures PSI indicating how much Co2 pressure is inside the keg. Adjustable output pressure 0-60 psi. 3000 psig Max Primary Inlet. 60 psig Safety Relief Valve.
Includes D system Lever Handle Keg Coupler which can Tap all Kegs
This is a Commercial Grade Lever Handle Keg Coupler that works with all American “D” System Kegs. This coupler features a 55-psi pressure relief valve and a nickel-plated forged brass body. To tap a keg all you have to do is pull out and then down on the lever handle to properly couple the keg. This Keg Coupler can be swapped out to a Home Brew Coupler for no additional cost.
Includes a 3″ Diameter Chrome Plated Metal Draft Tower
The Tower is a commercial grade Single Column, Single Faucet, Chrome Plated Metal Draft Tower. This Tower comes complete with a chrome plated faucet with brass lever and 5 Feet of 3/16 Inch I.D. Clear Beer Tubing that ends in a Nozzle & Hex Nut Assembly that connects to all standard keg couplers. This Tower is mounted using the gasket and four screws that are included.
• All dispensing accessories are UL recognized components
• Converts to refrigerator 2 full-width wire shelves
• Large enough to hold all full size kegs (Including Coors, Miller and many additional brands)
• Holds: 1/2 barrels / Full Size Kegs (15.5gal), 1/4 barrels / Ponies (7.75gal) and 1/6 barrels (5gal)
• Matte black cabinet with stainless steel door or entire black door
• Stainless door has a protective film on it to prevent scratches during shipment. You can peel the film off once the kegerator is set up, as well as black painted door is available for different optional.
• Digital temperature control keeps temperature in range of 32°F-75°F
• A perfect option for dispensing beer, soda or wine
• Deep Chill function under compressor cooling to quickly cool down warm keg
• Easy roll casters for mobility
• Removable built-in drip tray with grill to collect spills
• Chrome guard rail to protect your mugs and glasses from sliding off
• Plugs into standard home outlet
• UL Listed

Climate TypeSN/N/ST
Rated Voltage115V-220V
Rated Frequency50-60Hz
Control MeansMechanical Control
Cooling TypeCompressor Cooling
Body ColorOptional
Available Cubage 170L/6.0CU.FT
Net weight/ gross weight41KGS/43.5KGS
Product Size535*676*842MM
Packing Size575*700*880MM
Qtys per Containers193pcs/40HQ

This kegerator can fit different beer kegs,pls contact us for details.

Commercial Grade Kegerator



Back Bar & Direct Draw Commercial Keg Refrigerator with All Solid Doors

The Club Top Direct Draw Commercial Keg Refrigerators feature durable and attractive textured and laminated black vinyl exteriors with heavy-duty stainless steel countertops and removable easy-glide lids, galvanized steel interior walls, high quality stainless steel floors, and 1-3/4″ thick high density foamed-in-place polyurethane insulation. Heavy-duty recessed door handles allow for a flat surface, while door locks ensure that your kegs are protected from unwanted access.

Cabinet insulation is foamed-in-place polyurethane (CFC free) which helps to provide maximum operating efficiency and strengthen the overall construction. Lift-out heavy duty forced-air refrigeration system creates a steady flow of cold air through the complete product load and provides fast uniform recovery and cooling. Refrigerant used is R134a, which is CFC-free for full compliance to all environmental concerns.

NSF approved 3″ diameter insulated stainless steel single faucet draft arms with an air distributor. It has an easy-to-set analog dial thermostat that can be set between 33°F to 41°F to keep your draft beer at the perfect serving temperature. The chilled glass storage includes one adjustable epoxy coated wire shelf that makes it easy to always have a perfectly chilled glass on hand.
These commercial direct draw draft beer dispensers use a forced-air cooling system with dual evaporator fan motors to provide balanced airflow throughout the cabinet to ensure a faster temperature drop. They have a side mounted condensing unit, and oversized condenser and evaporator coils help to quickly achieve and maintain the desired temperature. A removable side panel and slide-out condensing unit allow for convenient repair and maintenance.
Brand Embraco or Danfoss compressor used.
Interior & Top 304 Stainless, Exterior Coated steel.
NSF and ETL certificated.


• Analog dial thermostat knob (32°F to 42°F)
• Heavy duty stainless steel countertop, textured and laminated black vinyl exterior
• Galvanized steel interior wall and stainless steel floor
• High quality 16 gauge stainless steel worktop
• 1-3/4″ thick high density foamed-in-place polyurethane insulation
• Slide-out condensing unit with oversized evaporator fan motors providing balanced airflow throughout cabinet to ensure faster temperature drop
• Energy efficient condensate drain pan assembly heated by high side copper tube
• Heavy duty recessed door handles with door locks
• Safety shielded incandescent interior lighting with on/off switch
• NSF and ETL approved 3″ diameter insulated stainless steel draft arm with air distributor
• Built-in caster thread receptacles for all units
• Shelves can be removed to increase keg capacity
• 2 Doors or 3 Doors, Designed for Built-in or Freestanding Use

DESCRIPTION (Material, Compressor Brand, Thermostat)Direct Draw
Refrigerator, 0 ~ 5 ℃
Embraco or Danfoss compressor
Interior & Top 304 Stainless, Exterior Coated steel
LOADING QTY 40' Container54 units36 units
Compressor HP1/3+1/3+
1/2 Barrel2pcs3pcs
Volume ( L )335L556L
Key Features
Built-in CapableYesYes
Security LockYesYes
Outdoor UseYesYes
Commercial UseYesYes
Drip TrayYesYes
Guard RailYesYes
Draft Beer Tower
Number of Faucets1 or as customized2
Color / MaterialBlack MetalBlack Metal
Number of Doors23
Door HandleRecessedRecessed
Cooling System
Defrost SystemAutomaticAutomatic

This Commercial Grade Kegerator does not include the Direct Draw Kit such as CO2 tank and Beer Barrels; it will need to be purchased separately locally.

Beer Flash Chiller


No. 1080203

No. 1080301

What is Flash Chiller

A Flash Chiller or Cooler is ideal for dispensing ice cold seltzer, juice, tea and beers when there is limited refrigeration and it is impracticable to use cold plates and coils requiring a continuous supply of ice and drainage.

  • The flash chiller allows beer to be dispensed at ice cold temperatures
  • Compact size fits on under counter use
  • Use at special events to dispense any beer ice cold
  • Included Pump for recirculating cold water for cooling the tower
  • Icebank prechiller for 1 beer , beverage or water line
  • Most suitable for cooling beer , beverages,  juice and pre-chilling water where there is limited refrigeration
  • Beer, beverage or water is chilled by running through long stainless steel coil submerged in ice cold water
  • Manual thermostat
  • Foam in place insulated bath
  • Agitator pump Totton
  • Ideal beer flash cooler / beer flash chiller!
  • R134a refrigerant
Model No.: 1080401Model No.: 1080203Model No.: 1080301
Numbers of coil: 2-4 coilNumbers of coil: 2-6 coilNumbers of coil: 3-8 coil
Nominal voltage/Frequency: 220-240 V/50HzNominal voltage/Frequency: 220-240 V/50HzNominal voltage/Frequency: 220-240 V/50Hz
Compressor brand: EmbracoCompressor brand: EmbracoCompressor brand: Embraco
Compressor power: 1/3 HPCompressor power: 1/3 HPCompressor power: 1/2 HP
Refrigerant: R134ARefrigerant: R134ARefrigerant: R134A
Water tank capacity: 40 LWater tank capacity: 70 LWater tank capacity: 100 L
Ice bank: 15-18 KGIce bank: 36-38 KGFOB PRICE: Ice bank: 44-46 KG
Temperature of beer on cooler's outlet (ambient temperature 3-7 ℃Temperature of beer on cooler's outlet (ambient temperature 3-7 ℃Temperature of beer on cooler's outlet (ambient temperature 3-7 ℃
Cooler capacity: 100 L/HCooler capacity: 200 L/HCooler capacity: 270 L/H
Agitator pump lift: 7 MAgitator pump lift: 7 MAgitator pump lift: 7 M
Cooler size: 410×410×680 MMCooler size: 500×500×790 MMCooler size: 590×530×850 MM
Net weight: 32.00-34.00 KGNet weight: 44.00-48.00 KGNet weight: 54.00-58.00 KG

How to Choose the best Kegerators & Beer Dispensers